Installation and debugging methods of solar LED lamps
Before installing the lamp to fix the foot, firstly make sure that there are no obstacles that block the sunlight of the solar cell module. If there is a lighting obstacle, the lamp must be avoided and installed. Then according to the relevant technical requirements, pre-embed the lamp foot, and wait for the embedded parts to meet the specified installation strength requirements, then install the lamp. The anchor screws must be tightened, and the nuts must not be loose or missing. Then connect the wires according to the wiring method and install the lamp correctly to ensure that the pole is vertical and not inclined. Adjust the solar panel to face the south with a difference of 5 degrees. After the lamp is installed, you can short-circuit the yellow and black wires of the controller to test whether the LED light source emits normally. If it is illuminated, the wiring and the controller are normal; if it is not illuminated, check whether the wiring is correct.
Applications
The application of solar LED lamps is now mature. The developed solar lighting products include: road lamp series, lawn lamp series, garden lamp series, advertising light box lamp series, neon lamp series, modeling landscape lamp series, signal lamp series, underwater lamp, ground buried lamp series and home lighting series, etc., Its high brightness, low cost characteristics have been recognized by society and consumers. By carrying out "energy-saving projects", people's awareness of solar LED lamps will continue to increase, and solar products will be promoted to every corner of society.
in conclusion
As people's awareness of solar LED lamps is getting higher and higher, the penetration rate of solar LED lamps and solar products will be higher and higher, and the market will become wider and wider. At the same time, with the reduction of the cost of solar LED lamps, solar products will enter a wider field and enter thousands of households to realize the "solar green lighting project" and become a shining landscape of urban lighting. Solar LED lamps are low-cost, high-energy-saving lamps that people can directly feel, and they will surely take the lead in the introduction and promotion of solar energy.