How can LED High-power Wall Washer be Waterproof
Only when the lamp is waterproof, the LED wall washer can exert its good effect and service life. Let me explain to you the steps and methods for the production and installation of LED wall washer:
1. First, solder the LED lamp beads on the aluminum substrate with a soldering iron and a tin bar for use.
2. The high-power wall washer with drive will drive glue filling to ensure that the drive is 100% waterproof.
3. Then try to light up the welded board to see if there is any false welding or no light. In this way, the initial aging can ensure that the LED wall washer is driven and the lamp beads are intact.
4. After the test is finished, put heat-dissipating silica gel on the back of the aluminum base plate, and put the board into the shell. The heat-conducting silica gel radiates the heat of the lamp beads to the lamp body, which can reduce the light decay of the lamp beads.
5. The preparation process is complete, solder the power supply to the positive and negative poles of the aluminum substrate, and then tie the two ends with tape for filling.
6. After the glue is dry, you can assemble other parts. The structural waterproof wall washer does not need to be glued. If it is not waterproof in structure, it needs to be glued well.
7. After the glass is covered, plug the head.
8. The above steps have been completed, and the aging test must be carried out for 24 hours before packaging.