300W LED Flood light
OAK-FL-Smart-300W
Cree chip from USA original and Meanwell driver.
CE,ETL,RoHS SAA and C-tick certified.
IP67 protection and 5-year warranty.
Real 170lm/w, reduced light spill and anti-glare design.
Precise optical system maximizes the light reaching the ground
5-10 times brighter than traditional lights, 300W can replace 1000-1500W traditional light.
Low flicker rates less than 0.2%. The light retains 50% after 100000h lifespan.
316 stainless steel bracket for anti-corrosion near the sea.
MN | Power (W) |
Size (mm) |
Efficiency | Beam Angle |
Color |
Dimming |
OAK-FL-100W-Smart | 100 | 318x255x70 | 170lm/w | 15, 25, 40, |
2700-6500K | PWM |
OAK-FL-150W-Smart | 150 | 318x320x70 | ||||
OAK-FL-200W-Smart | 200 | 418x320x70 | ||||
OAK-FL-300W-Smart | 300 | 468x436x70 | ||||
OAK-FL-400W-Smart | 400 | 568x436x70 | ||||
OAK-FL-500W-Smart | 500 | 568x501x70 | ||||
OAK-FL-600W-Smart | 600 | 568x566x70 | ||||
OAK-FL-720W-Smart | 720 | 668x566x70 | ||||
OAK-FL-800W-Smart | 800 | 668x631x70 | ||||
OAK-FL-1000W-Smart | 1000 | 718x696x70 |
Parameters
Model No. |
OAK-FL-Smart-300W |
Light Source |
Cree COB |
Driver |
Meanwell |
Power |
300w |
Luminous Efficiency |
170 lm/W |
Luminous Flux |
51,000 lm |
Input Voltage |
90~305V AC |
Beam Angle |
15° /25° /40° /60° /90° /120°optional |
Color Temperature |
1700~10,000K |
CRI |
≥80 |
IP Rating |
IP66 |
Lifespan |
>80000h |
Power Factor |
≥0.95 |
Power Efficiency |
≥93% |
Power Frequency |
50~60HZ |
Working Temp. |
-40 ~ +55°C |
MH reference Replacement |
1000-1500W |
Surface Treatment

Special cooling channel
make sure the heat transfer to the air in different directions

Project References
1. Energy saving:
LEDs is a surface light source, which used a professional optical lens to photoelectric transmission to reach high light utilization rate.
So a small power can replace the traditional high-power lighting.
Comprated with incandescent lamps, energy saving of LEDs is about 75%-85%.
E.g.: 100W LED flood light luminous flux is about equal to 500W-600W incandescent lamp luminous flux.
2. Green environmental protection:
Using solid mercury agent, even if broken, will not pollute the environment. The recovery rate is more than 99%.
And LEDs is without ultraviolet and infrared light, so no radiation, but soft light effect.
So it is a true environmentally friendly green light source.
3. Long lifespan:
LED lighting is a solid light source, epoxy resin and silicone encapsulation closed, and the luminous body part is not easy to loosen.
So there is no filament easy to burn, thermal deposition, high light decay and other shortcomings.
The service life can reach more than 100,000 hours while the service life of traditional incandescent lamps about 1000 hours, the energy-saving lamps (CFL) life of about 8000 hours.
4. No strobe:
Due to its high operating frequency, it is considered "no strobe effect at all", which will not cause eye fatigue and protect eye health.
5. Good color rendering:
Color rendering index of LEDs is more than 80, soft light, showing the natural color of the illuminated object.